Lemonator will counteract any water-based malodor as long as it comes in contact with it. Can be poured, sprayed, injected, and cold fogged. The fresh sweet lemon fragrance will leave the space smelly clean and renewed.

LEMONATOR

Professional strength Odor Destroyer

DIRECTIONS FOR USE: Always pre-test in an inconspicuous area for fabric compatibility. For best results locate all areas which are sources of the odor. Remove as much of the odor causing source as possible by cleaning the areas with the appropriate products, tools, and equipment. Always mix with the hottest water possible. This will allow faster reaction time with the malodors.

General Usage: Always clean/remove as much of the source matter (causing the odor) as possible as your first step. Dilute LEMONATOR 1 to 16 ounces per gallon depending on odor severity. NOTE: The stronger the dilution…the more rinsing is required to remove the surfactant. Dilute with Hot Water.

EXTRACTION CLEANING FOR URINE CONTAMINATION: Pre-treat all areas of concern with a hot solution of an acidic cleaner or a urine pre-treatment product. Allow product to dwell and then flush thoroughly with a sub-surface tool. Step 2: Dilute Lemonator (2-4 ounces for mild odors and 6-8 ounces for stronger odors) with hot water. Remember to make sure you reach all areas. This means pouring the product on might make the most sense to reach the subfloor and allow the product to soak in as well. Allow product to dwell. Extract areas with a sub-surface tool and rinse. Step 3: After rinsing, Clean the carpet as you would normally. Use an Airmover to help speed dry the treated areas.

INJECTING: Dilute Lemonator 16oz per gallon of hot water. Inject into areas to be treated making sure to saturate thoroughly.

FOGGING: Dilute Lemonator 8 to 16oz per gallon and wet/cold fog as directed.